Kino Flo’s award-winning FreeStyle 31 unleashes your creative side with a quick-release feature to remove the LED panel from the fixture, cutting the weight nearly in half (from 14.5 lbs/6.6kg to 8.5 lbs/4kg) and creating a smaller form factor for better rigging flexibility. The FreeStyle 31 is known for its high color rendering white light, full hue and saturation color, cinema gel choices, and RGB chromatic selection via the AC/DC FreeStyle 150Watt controller. It has built-in Lumen Radio wireless DMX; no extra cost for wireless receiver accessories. The light can also be operated directly up to 50 feet away from the controller via Kino Flo head cables.
The LED panel’s corner bumpers can be used to hang from rope or wire. The panel also takes a Twist-On mount for working on light stands. The Freestyle 31 comes complete with the full color, programmable FreeStyle controller, Head Cable (25ft), Complete Fixture with removable LED panel, and a twist-on KinoGrip Center Mount. Honeycomb 90° or 60° louvers, mounted with Velcro, give direction to the light, and when removed the panel displays a broad soft beam across the set.
The Freestyle’s driver technology achieves bright, soft light with continuous dimming from 100% to 0% on a linear or square curve without flicker at higher camera speeds or at varied shutter angles. There is no light level change when shifting from 2500K to 9900K, and the color doesn’t change when the light levels rise or fall.
Color and luminosity remain stable over the rated life of the LED’s using Kino Flo’s advanced True Match® daylight and tungsten color management system, which has been an unqualified success since Kino Flo introduced the idea of soft panel True Match Celeb Studio LED’s ten years ago. Passive cooling keeps the LED’s in good shape for a longer usable life than fixtures that require electric fans.
The FreeStyle 31 and 31GT LED Systems consist of four components: FreeStyle 31 or 31GT LED Fixture, Mounting Plate, Extension Cable and FreeStyle 152 LED DMX Controller. It was designed in this manner to allow the greatest flexibility in lighting solutions for challenging situations.
The FreeStyle LED fixture’s modular design includes built-in barndoors, a removable LED panel and removable louver. The louver is held in place with Velcro fasteners. The LED panel can be removed from the fixture housing by pressing the locking pin and turning the thumbscrew. The fixture and removable LED panel have twist-on mating plates to accept a twist-on mount. The four molded corners offer additional rigging points for rope hanging, for example. With the KinoGrip mount, the fixture or LED panel can be hand-held. When the mount is removed, the fixture is flat and can be screwed to the wall or ceiling through its eyelets. For further versatility, the FreeStyle 152 LED DMX Controller can also be strapped to the back of the fixture with Velcro or used remotely with an extension cable.