Yes, Auroris uses the same color science that is in LiteMat Spectrum so they will work perfectly together.

Yes, the included PDX connector on the back of the LiteDimmer Spectrum AC600 can be used to power and control any LiteMat Spectrum fixture.

One Auroris X system includes the Auroris X head, two 25 ft header cables, two LiteDimmer Spectrum AC600s, and two main power cables.

You can use up to 200 ft of cable between a LiteDimmer Spectrum AC600 and an Auroris fixture. However, this will reduce the light output by about 22%.

Yes, Auroris uses Kino Flo’s Spectrum color technology which consists of six LED colors – Tungsten, Daylight, Red, Green, Blue, and Amber. This enables high color rendition white light and a massive selection of vivid saturated colors.

While the Auroris truss system and accessories offer a benefit with tight integration between components, it is not required that the accessories be used with Auroris. Auroris was designed to work with a large variety of rigging equipment and light control products.

The LiteDimmer Spectrum AC600 will include all the features from the LiteMat Spectrum dimmer in Spectrum OS2. Later in 2022, a software release will introduce Art-Net, sACN, and several other new features.

Auroris X will start shipping in May 2022. Auroris V will start shipping in August 2022. Pre-orders are being taken now.

Auroris is IP20 rated which means it is not water or weatherproof. However, due to Auroris low heat emission, a simple waterproof tarp can be secured to the back of Auroris to enable rainwater to roll right off.